RGB LED Strip
An RGB LED strip.
Specifications
Dimensions: 1000 x 10 x 2 mm
Voltage: 5V
Current: 1A
Wattage: 0.3W
No. of LEDs: 60
Wiring Diagram
This product is recommended for use with Robotbit.
Connect Red wire to 5V
Connect White wire to GND
Connect Green wire to Signal Pin
MakeCode Coding Tutorial
Import Robotbit Extension: https://github.com/KittenBot/pxt-robotbit
Or search Robotbit in the search bar
Importing Extensions
Neopixel Coding Blocks
Neopixel Coding
Lighting Up a Single Colour
Lighting Up a Rainbow Effect
Adjusting Brightness
Controlling Individual LED
Use the show block to update the effects.
LED Marquee
For shift, the effect will end after the pixel moves past the end(60 LEDs).
For rotate, the pixel will restart at 0 after moving past the end(60 LEDs).
Lighting Up a Selection of LEDs
Custom Colours
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
FAQ
Q: Why does the LED strip only lights up RED no matter what colour I chose? A: There is not enough power.
Solution: Switch on the power of the Robotbit or connect an external power supply or lower the brightness.
Precautions
Do not apply a voltage more than 5V.
Connect an external power supply such as an USB power bank for extended periods of use.
Lower the brightness when lighting up a large number of LEDs.
This product is designed for users 14 years or older, please seek parental assistance for users under 14.
Please refer to official product guidelines before using. Only connect wires according to the instructions.
Do not place this product on top of metal or conductive surfaces when using to prevent short circuits.
Do not use this product near water or wet areas to prevent short circuits.
Do not touch exposed contacts or wires.